Electric Sheet Metal Power Control Cabinets Custom
Sheet Metal Power Control Panel Cabinets,Power Control Cabinets Custom,Electric Power Control Cabinets
How to reduce the occurrence of burrs in the laser cutting production First check if there is a problem with the laser output. Is the spotted spot very round (the circle indicates that the lateral distribution of the laser energy is uniform and the cutting quality is good) Check if the lens in the laser transmission process is dirty, or if the lens is dirty, and the lens has small cracks that are not easily visible to the naked eye, which will affect the transmission of the laser. This is followed by an adjustment of the process parameters. If the burrs generated after laser cutting of stainless steel have a certain hardness, it is very difficult to take time and affect the appearance. It is best to solve it from the root cause. First of all, the purity of the auxiliary gas is high, and it is very important to change the purity of a gas supplier with a better quality. Then the anti-cutting parameters are adjusted to the best, the focal length, cutting speed, power, running time, etc. Sub-adjustment (please let the professional engineer debug), the parameters provided by the machine can not cut the delicate workpiece, so only after many attempts can the burr be minimized
Item NO.:
0017-EPCC-TCHRittal PS parallel control cabinet powder coated
- protection grade: IP56;
- Certificate: CE, IP56;
- material: high quality cold-rolled steel plate, the mounting plate for the galvanized sheet;
The door 2.0mm, mounting plate 2.5mm, the cabinet is 1.5mm;
- surface treatment: pickling phosphating, external powder coating, color: RAL7035/RAL7032 weave or flat.
Standard configuration: - the front door (single or double open), the backplane, roof, floor, the installation of 1 boards, sealing strip,
Door lock (Ping Bansuo), hinge.
Optional configurations: prevent canopy, the side plate (removable), computer, limit, carriage door support, lamp,
Stringer, file bag.