Gates control system electrical panel enclosure
Stainless steel 316 material gates control panel enclosures making.
How to reduce the occurrence of burrs in the laser cutting production First check if there is a problem with the laser output. Is the spotted spot very round (the circle indicates that the lateral distribution of the laser energy is uniform and the cutting quality is good) Check if the lens in the laser transmission process is dirty, or if the lens is dirty, and the lens has small cracks that are not easily visible to the naked eye, which will affect the transmission of the laser. This is followed by an adjustment of the process parameters. If the burrs generated after laser cutting of stainless steel have a certain hardness, it is very difficult to take time and affect the appearance. It is best to solve it from the root cause. First of all, the purity of the auxiliary gas is high, and it is very important to change the purity of a gas supplier with a better quality. Then the anti-cutting parameters are adjusted to the best, the focal length, cutting speed, power, running time, etc. Sub-adjustment (please let the professional engineer debug), the parameters provided by the machine can not cut the delicate workpiece, so only after many attempts can the burr be minimized
Item NO.:
0067-ECPB-TCHIP65 control panel enclosure, stainless steel 316 material, Sheet Metal Manufactured
Feature:
Material: |
stainless steel 304,316,201 |
Thickness: |
1.2mm,1.5mm |
Dimension: |
300mm x 400mm x 200mm |
Door: |
single door |
Spare parts: |
back mounting plate, two locks, hinge |
Surface treatment: |
Polishing, brushing |
Installation: |
indoor floor |
Function: |
Power control electrical box |
Certificate: |
IP65, RoHs |
Working environment: |
air port, building, hotel, shopping centre, housing estate, school,factory etc. |
1. The box is made of stainless steel 316 material, which is rust proof, corrosion-resistant, and suitable for outdoor use.
2. The door lock is made of stainless steel 304 material, which is rust resistant, durable, and aesthetically pleasing.
3. The sealing strip of the door panel is made of PU material with one-time pouring foam, which has good sealing performance and meets the requirements of IP65 waterproof and dustproof level.
4. The door panel is equipped with grounding studs and grounding wires for lightning protection, protection of electrical appliances, and human safety.
5. The screws are made of stainless steel 304 material, which has a good rust prevention effect.
6. The hinge is made of stainless steel 304 material, tightly connected and easy to open and close.
7. There is a square inlet hole at the bottom of the box, equipped with a gland and locked with screws, making it easy to operate.
Zhangzhou Taichengda Metal Products Co., Ltd is a sheet metal fabricated manufacturer. Many kinds of steel cabinets and enclosures made of stainless steel and mild steel material here we do the custom production, such as electric control panel cabinets, gates operator covers, washroom dispensers, switch button control cabinets, IP NEMA enclosures, RITTAL power control cabinets, distribution panel boxes, high and low voltage distribution cabinet, UPS power supply cabinet, power boxes, instrument case, meter boxes, console boxes, electrical operator tables, sheet metal laser cutting parts, punching parts, rolling circularity parts etc..
Most of these sheet metal enclosures and cabinets are used in Power Control System, Gates Operator System, Health Care System, Air Compressor System, Natural Gas System, Compressed Air Refrigeration System, Compressed Air Dryer, Water Air Conditioning System, Sterilization Machine, Frequency Conversion Pump Unit, Oil And Gas Industry and so on.
With more than 15 years experience, our company and products have been approved by ISO, SGS,CCC, CE and IP65 certification. Come on with us ,please! Good quality products with best price here will be always offered to you