Stainless steel 304 automatic soap dispenser
Surface mounted SS304 touchless foaming soap dispenser, Only sensing, no need to touch.
How to reduce the occurrence of burrs in the laser cutting production First check if there is a problem with the laser output. Is the spotted spot very round (the circle indicates that the lateral distribution of the laser energy is uniform and the cutting quality is good) Check if the lens in the laser transmission process is dirty, or if the lens is dirty, and the lens has small cracks that are not easily visible to the naked eye, which will affect the transmission of the laser. This is followed by an adjustment of the process parameters. If the burrs generated after laser cutting of stainless steel have a certain hardness, it is very difficult to take time and affect the appearance. It is best to solve it from the root cause. First of all, the purity of the auxiliary gas is high, and it is very important to change the purity of a gas supplier with a better quality. Then the anti-cutting parameters are adjusted to the best, the focal length, cutting speed, power, running time, etc. Sub-adjustment (please let the professional engineer debug), the parameters provided by the machine can not cut the delicate workpiece, so only after many attempts can the burr be minimized
Item NO.:
001-MCC-TCHPayment:
FOBProduct Origin:
ChinaShipping Port:
XiamenLead Time:
20-25Stainless steel 304 manual retractable ceiling column
The Retractable Ceiling Columnshall be electrically operated with 120VAC motor. The column shall be 15" square and fabricated from stainless steel, with all edges and surfaces having a No. 4, brushed finish. The trim bezel shall be adjustable to compensate for variations in finished ceiling thickness. The column shall consist of an upper shroud section with a telescoping inner shroud section capable of being extended and retracted a full 15".
When multiple electrical and medical gas services are required in congested environments,ceil service columns for maximum convenience and accessibility.
Name |
Manual retractable ceiling column |
Material: | SS304 |
Thickness: |
2.00mm |
Dimension: | 240mmx380mmx1680mm |
Surface treatment | Satin |
Zhangzhou Taiyan Metal Co., Ltd is a sheet metal fabricated manufacturer. Many kinds of steel cabinets and enclosures made of stainless steel and mild steel material here we do the custom production, such as medical security console box, gas floor pedestal, turnstile, wing gates, electric control panel cabinets, gates operator covers, washroom dispensers, switch button control cabinets, IP NEMA enclosures, RITTAL power control cabinets, distribution panel boxes, high and low voltage distribution cabinet, UPS power supply cabinet, power boxes, instrument case, meter boxes, console boxes, electrical operator tables, sheet metal laser cutting parts, punching parts, rolling circularity parts etc..
Most of these sheet metal enclosures and cabinets are used in Access Control System, Power Control System, Gates Operator System, Health Care System, Air Compressor System, Natural Gas System, Compressed Air Refrigeration System, Compressed Air Dryer, Water Air Conditioning System, Sterilization Machine, Frequency Conversion Pump Unit, Oil And Gas Industry and so on.
FAQ:
Q1. May I have a sample first?
A: Yes, we would like to make sample for your checking first. Mixed samples are acceptable.
Q2. What about the lead time?
A: It needs 3-5 working days for sample, 5-8 working days for bulk order usually.
Q3. Do you have any MOQ for order?
A: Low MOQ, it's according to the request of different products.
Q4. How do you ship the goods and how long does it take to arrive?
A: For Bulk order, we usually ship the goods by sea, it will take about 30 days to arrive to your sea port. For small or urgent order, we usually ship by air or international express (DHL, UPS, FedEx, TNT etc.), it usually takes 3-5 days to arrive. All the shipment terms shall be accorded to your request.
Q5.Can you customize the metal products according to my design and make my own brand logo?
A: Yes. We are the sheet metal fabrication manufacturer, we can do the custom production. Please kindly send us your detailed request (drawing, photos etc.), so we will make according to you design. As brand logo, we usually do by silk screen, laser etching etc., please tell us the style and sizes for our making.
Q6. What is the quality control do you have?
All products have to pass strict inspection before they were sent out.
We believe that the quality is the soul of an enterprise. Therefore, we always put quality as the first consideration.