Butterfly Type Stainless Steel 304 Wing Gates
Butterfly Stainless Steel 304 Wing Gates,Stainless Steel 304 Wing Gates.
How to reduce the occurrence of burrs in the laser cutting production First check if there is a problem with the laser output. Is the spotted spot very round (the circle indicates that the lateral distribution of the laser energy is uniform and the cutting quality is good) Check if the lens in the laser transmission process is dirty, or if the lens is dirty, and the lens has small cracks that are not easily visible to the naked eye, which will affect the transmission of the laser. This is followed by an adjustment of the process parameters. If the burrs generated after laser cutting of stainless steel have a certain hardness, it is very difficult to take time and affect the appearance. It is best to solve it from the root cause. First of all, the purity of the auxiliary gas is high, and it is very important to change the purity of a gas supplier with a better quality. Then the anti-cutting parameters are adjusted to the best, the focal length, cutting speed, power, running time, etc. Sub-adjustment (please let the professional engineer debug), the parameters provided by the machine can not cut the delicate workpiece, so only after many attempts can the burr be minimized
Item NO.:
0003-AACS-TCH
Standard technical parameters
1: with 50 thick 1.5 circular railing
2 the center column; 80X80 thick 3 (with 75x25 tube)
The 3 frame side; 2.5 thick plate punching
Shape: 1750*1450*2350 clearance
Case material: steel structure of the whole letter
Steel structure barrier bar
Steel gate
The fence rod length: 600mm, a portal page by the fence 120 DEG and 90 DEG average composition
The fence transmission: digital mode
The fence steering: one-way, two-way (optional);
Automatic reset function: after opening, not within the prescribed period of time did not pass the system will automatically lock, the passage of time is adjustable;
By using the optical hole working principle, on the input control signal without delay requirements
Direction of rotation: unidirectional or bidirectional
Half height turnstile of access control systems
We Proving professional sheet metal processing, CNC punching processing, chassis cabinets processing, auto parts metal processing electroplating processing spray processing NC bending process of CNC punch press processing elevator components equipment shell chassis cabinets (network cabinets, power distribution cabinet, financial self-service terminal cabinet, a body machine), stainless steel chassis cabinets processing etc..