Butterfly Type Stainless Steel 304 Wing Gates
Butterfly Stainless Steel 304 Wing Gates,Stainless Steel 304 Wing Gates.
How to reduce the occurrence of burrs in the laser cutting production First check if there is a problem with the laser output. Is the spotted spot very round (the circle indicates that the lateral distribution of the laser energy is uniform and the cutting quality is good) Check if the lens in the laser transmission process is dirty, or if the lens is dirty, and the lens has small cracks that are not easily visible to the naked eye, which will affect the transmission of the laser. This is followed by an adjustment of the process parameters. If the burrs generated after laser cutting of stainless steel have a certain hardness, it is very difficult to take time and affect the appearance. It is best to solve it from the root cause. First of all, the purity of the auxiliary gas is high, and it is very important to change the purity of a gas supplier with a better quality. Then the anti-cutting parameters are adjusted to the best, the focal length, cutting speed, power, running time, etc. Sub-adjustment (please let the professional engineer debug), the parameters provided by the machine can not cut the delicate workpiece, so only after many attempts can the burr be minimized
Item NO.:
0001-AACS-TCHFull automation optical wing turnstile gates
Case material: Standard 304 stainless steel
External dimensions: 1400 length * 300 width * 1000 (M)
Telescopic arm length: 260MM
Channel width: 570MM
Direction of passage: one-way or two-way (can be set)
Working environment: indoor and outdoor (shaded) -10 ℃~50 ℃ Relative humidity: ≤ 90%, non condensing
Material of baffle: PU soft baffle and plastic acrylic baffle (optional)
Manufacturing process of turnstiles and gates:
Zhangzhou Taiyan Metal Co., Ltd is a sheet metal fabricated manufacturer. Many kinds of steel cabinets and enclosures made of stainless steel and mild steel material here we do the custom production, such as Turnstile, wing gates, electric control panel cabinets, gates operator covers, washroom dispensers, switch button control cabinets, IP NEMA enclosures, RITTAL power control cabinets, distribution panel boxes, high and low voltage distribution cabinet, UPS power supply cabinet, power boxes, instrument case, meter boxes, console boxes, electrical operator tables, sheet metal laser cutting parts, punching parts, rolling circularity parts etc..
Most of these sheet metal enclosures and cabinets are used in Access Control System, Power Control System, Gates Operator System, Health Care System, Air Compressor System, Natural Gas System, Compressed Air Refrigeration System, Compressed Air Dryer, Water Air Conditioning System, Sterilization Machine, Frequency Conversion Pump Unit, Oil And Gas Industry and so on.