Wall Mounted Window Type Electric Steel Enclosures
Wall Mounted Electric Steel Enclosures,Window Type Steel Enclosures With Galvanized Plate,Wall Mounted Window Type Steel Enclosures
How to reduce the occurrence of burrs in the laser cutting production First check if there is a problem with the laser output. Is the spotted spot very round (the circle indicates that the lateral distribution of the laser energy is uniform and the cutting quality is good) Check if the lens in the laser transmission process is dirty, or if the lens is dirty, and the lens has small cracks that are not easily visible to the naked eye, which will affect the transmission of the laser. This is followed by an adjustment of the process parameters. If the burrs generated after laser cutting of stainless steel have a certain hardness, it is very difficult to take time and affect the appearance. It is best to solve it from the root cause. First of all, the purity of the auxiliary gas is high, and it is very important to change the purity of a gas supplier with a better quality. Then the anti-cutting parameters are adjusted to the best, the focal length, cutting speed, power, running time, etc. Sub-adjustment (please let the professional engineer debug), the parameters provided by the machine can not cut the delicate workpiece, so only after many attempts can the burr be minimized
Item NO.:
0021-EPCC-TCH
Production of materials:
Cold rolled steel sheet
The cabinet surface treatment:
Cabinet phosphating priming treatments, the outside of the cabinet for powder
At the end of the coating, color can be divided into RAL7032
And the RAL7035 two kind of weave, mounting plate
For galvanizing
Cabinet protection grade:
IP54 (GB4205-1993)
Standard configuration of the cabinet:
The front door, back plate, mounting plate, cabinet,
The sealing strip, door locks, side plate (optional)